![]() ![]() The “Color Range” should be set to “Partial.” Press OK. ![]() Go to the “Video” section at the top and change the “Color Space” to “601.” The reason for this is that your standard definition video source was originally recorded in a 601 color space (709 is for HD content and sRGB is for screen captures). The last step in the settings menu is to go into the “Advanced” section (the last one listed on the bottom left). You only have one track of audio, so for Track 1 select “192” from the dropdown (as shown below). The Recording settings I just described are shown below: For “Tune” select “Film.” Don’t press OK yet.If you notice any stuttering in your recordings, try a higher setting such as “superfast”). Slower presets will use more computations for quality, but will use much more CPU. For CPU Usage Preset I used “medium” (Faster presets will use less CPU at the cost of quality computations.Deselect “Rescale Output” if it’s selected.For that reason I’ll use “x264” as the encoder since by default everyone has that as an option. For “Encoder” the options may vary depending on your system.For “Audio Track” select “1” (it’ll be a stereo track).For “Recording Format” select “mp4” from the dropdown.I checked the box for “Generate File Name without Space” but it’s not a requirement.For “Recording Path” select where you’d like to have your file saved.For the “Output Mode” (at the very top of the screen) select “Advanced”.Here are the settings to use in this window: In the same menu you were just in (File – Settings), click on the “Output” tab. The settings I just described for NTSC are shown below: I’m assuming you’ll be recording these files for playback on a computer or mobile device, but if your intent is to burn the files to a DVD for use in a DVD player, you can use 720×480 as the output for NTSC or 720×576 for PAL.įor the “Downscale Filter” setting you can keep it at Bicubic (Sharpened scaling, 16 samples).įor the “Common FPS Values” select “29.97” (for NTSC sources). By changing the output resolution, you’ll be using a square pixel aspect ratio which will look correct on more modern devices. The reason for this is that your old-school VHS tapes use a resolution that will not look correct when played back on a typical computer or phone screen (it will look a bit stretched). If you’ll be digitizing your tapes for use on a modern device (like a computer or a phone) use one of these for the “Output (Scaled) Resolution” setting: NOTE: You’ll need to highlight the current resolution and type your Base (Canvas) Resolution in, as it’s not available in the dropdown. The PAL region is a television publication territory that covers most of Asia, Africa, Europe, South America and Oceania. For PAL, change the “Base (Canvas) Resolution” to 720×576.The NTSC standard was used in most of the Americas (except Argentina, Brazil, Paraguay, and Uruguay), Liberia, Myanmar, South Korea, Taiwan, Philippines, Japan, and some Pacific Islands nations and territories. If you are in the United States, use this setting. For NTSC, change the “Base (Canvas) Resolution” to 720×480.In the Settings menu, click on the “Video” tab. To open the settings, click on the “File” menu and select “Settings” as shown below. Change Canvas and Output Settingsįirst you’ll want to set up your canvas and output settings. Click “No” (we’ll be going through all the settings separately). When you first launch OBS after installing it, it will ask if you’d like to run the auto-configuration wizard. Open the “Sound, video and game controllers” section and make sure that “USB 2828x Audio Device” and “USB 2828x Device” are shown, as shown below.ĭownload and install OBS – Configure OBS To verify that the adapter has been correctly installed, open your device manager by right clicking the Windows button and choosing “Device Manager” as shown below. Plug in the AdapterĪfter you’ve connected the cables from the VCR to the adapter, go ahead and plug the adapter into an available USB port on your computer. Once downloaded, extract the zip and run the Setup file from within the “Windows” folder. If you purchased the device that I recommended, download the latest drivers from here (use the “Drivers & Downloads” tab). OBS downloaded and installed (OBS is free).I used this one from Amazon, which is $40 RCA Cables and (if applicable) an S-Video cable (depends on your VCR).OBS is an incredibly versatile (and free) tool, and it can even be used to digitize VHS tapes with an inexpensive piece of hardware (and a VCR, of course). If you’d rather watch a video tutorial, you can do so below: If you are interested in capturing lossless, 4:2:2 video files, have a look at this post. The updated converter records audio in stereo, captures both fields of video, and is verified to work with Windows 11. NOTE: This post was updated in January, 2022, and references a different USB converter than the one I had previously suggested in 2021. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |